Denver HVAC Help

Swamp cooler repair and conversion in Denver

The swamp cooler is a Front Range classic: a box on the roof that cools a house by pushing air through wet pads. It works well in dry air, costs little to run and needs seasonal care. It also has limits, and plenty of owners eventually ask whether it is time to switch.

How a swamp cooler is serviced

An evaporative cooler has few parts: a blower, a water pump, a float valve and pads. Start-up in spring means checking the pads for mineral buildup, the pump and the water line, the belt and the float. Pads usually need replacing every year or two, sooner where the water leaves heavy mineral deposits, and a pump that has sat dry all winter can fail on first use.

Shutdown in fall is as important as start-up. The water line should be drained and the cooler covered so freezing does not crack the pump or the fittings. Most spring failures are really last fall’s skipped shutdown.

Where swamp coolers stop making sense

A swamp cooler adds moisture to the air, which is a help in Denver’s dry afternoons and a drawback on the rarer humid days, when it cools poorly. It also needs an open window or vent to work, and it cools to a temperature set by the weather rather than by a thermostat. Owners switch for a few reasons: they want steady temperatures, they are adding a bedroom or office, or the cooler is old enough that repairs cost more than the comfort is worth.

Converting to air conditioning

Replacing a swamp cooler with refrigerated air is a bigger project than a like-for-like swap, because the ducts that carry cool air from a rooftop cooler are not built for a standard air conditioner. A good quote spells out whether the existing ducts are reused, repaired or replaced, how the roof opening will be closed, and what is done about the furnace and the thermostat. For houses with a forced-air furnace, a split system connected to the existing ducts can be a sensible path. For houses without one, ductless mini-splits are worth pricing alongside.

Swamp cooler questions, answered plainly

Why does my swamp cooler smell musty?
A musty smell usually comes from stale water or old pads. Draining the water, replacing the pads and cleaning the pan normally resolves it.
When should I start my swamp cooler?
Typically in late spring, after a check of the pads, pump and water line. Running it on a mild day first lets any problem show up before a hot week.
Is switching to air conditioning worth it?
It depends on the house and the budget. If steady temperatures and humidity control matter to you, or the cooler needs major repair, the conversion deserves a quote.
Most of what keeps a Denver house warm sits below the floor. What happens in the basement decides the winter. Where in a Denver house the trouble on this page usually starts.
Basement Point 1: thermostat 1 Point 2: return and filter 2 Point 3: basement furnace 3 Point 4: coil and condensate drain 4 Point 5: basement ducts 5 Point 6: outdoor unit 6
  1. 1 Thermostat: It decides when everything starts. In April it can call for heat at dawn and cooling by afternoon.
  2. 2 Return and filter: Where the house breathes in. Dry Front Range air clogs it faster than most owners expect.
  3. 3 Furnace: In a basement closet, idle for six months, then asked for everything on the first cold night.
  4. 4 Coil and condensate drain: Ice in July if airflow drops, a frozen drain line in January if the route crosses a cold corner.
  5. 5 Basement ducts: Sheet metal through the joists and up old chases, with leaks in places nobody visits.
  6. 6 Outdoor unit: Thin air, cottonwood fluff in June and a long dry spell: less margin than the label implies.

Other services covered here

Areas covered

All areas covered